| 1 |
Box Furnace – 1700 C (RR) |
|
|
| 2 |
Tubular Furnace – 1250 C (RR) |
|
|
| 3 |
Arc Furnace (RR) |
Arc Furnance |
Few miligram sample |
| 4 |
Furnaces (up to 1600 C) (RR) |
Box furnance |
Not available |
| 5 |
Dielectric and PE loop measurements (RR) |
Dielectric measurement: Capacitance vs. Temperature, or freqency, Temperature 80-400 K, Frequency: 4Hz-8MHz, PE Measurement: Temperature 80-400 K, Voltage: 10V, |
Hard pellet with diameter less than 10mm, |
| 6 |
LTHM Scanning Probe microscope (RR) |
AFM, MFM, ctAFM, PRFM, Scan area ~15um x 15um, Temperature 5-300 K (Maximum temperature 200 K preferred), Magnetic field: 9 Tesla |
~5mm x 5mm with one polished surface, uniform thickness less than 2 mm. |
| 7 |
Ac-Susceptibility Setup (RR) |
|
|
| 8 |
7-Tesla SQUID Magnetometer (RR) |
|
|
| 9 |
16-Tesla VSM (RR) |
|
|
| 10 |
Specific heat, 2K, 9Tesla(RR) |
Magnetic field : 9 Tesla, Temperature: 2-370 K (Specific heat) |
~ 1-20 mg with one flat surface, sample size less than 3mm |
| 11 |
16-Tesla magnet system (RR) |
R vs. T; Magnetic field: 14 Tesla, Temperature: 2-300 K |
~10mm x 1mm x 0.5mm, Resistance less than 1 mega-ohm |
| 12 |
Sample cutting machine (RR) |
|
|
| 13 |
Sample cutting machine using spark erosion (RR) |
|
|
| 14 |
Glove Box (RR) |
|
|
