| 1 |
Transmission Electron Microscope |
FEG with 200 kV operation with TEM line resolution of 0.14 nm. Analytical capabilities : EDS; and EELS using the in-column energy filter. |
Non-magnetic, vaccum compatible, non-biological, non-radioactive. |
| 2 |
IRFZ Single Crystal Growth Furnace |
Vaccum upto 5x10-5 mbar and Maximum gas pressure 9.5 atmosphere. Temperature ~1800 C. Maximum crystal growth length ~100 mm |
Presynthesized polycrystalline feed rods (minimum two per sample), well sintered with ~100 mm length and ~6 mm diameter |
| 3 |
Microhardness tester |
|
|
| 4 |
Sample Preparation for Microscopy (TEM) |
|
|
| 5 |
Ball Indentation |
Ball indentation technique is applied to obtain tensile, hardness and fracture properties of materials using miniature specimens. Operating temperature: -160 deg. C to +700 deg. C 17 kN capacity load frame Spherical indenters of 0.25, 0.51, 0.76 and 1.57 mm diameter Motorised X-Y table with high resolution video camera |
Please contact for details |
| 6 |
Small Punch Creep System |
Creep curve and rupture life can be obtained by testing small specimen of size 10mm x10mm x 0.5mm Maximum temperature: 700 deg. C Maximum load capacity: 2 kN Environment: argon atmosphere Load controlled and strain controlled modes of testing |
Please contact for details |
